50 www.plastidip.co.uk Sales +44 (0) 1730 823 823 TECH DATA PLASTI DIP page 3 SPECIFICATIONS Solids (wt) 24% Tensile (ASTM D-638) 3,740psi Elongation (ASTM D-638) 430% Cut resistance (ASTM D – 1044): very good Stone abrasion (ASTM D – 3170): excellent Shelf life 1 year at 25°C (77°F) Chemical resistance Acids, alkalines, pollutants: Excellent Petroleums: Limited Finish Matt (see Glossifier F-799 for a clear shine top coat) Durometer shore A (ASTM D – 2240) 70 Salt spray (ASTM B – 117) passed 1,000 hours Weatherability (ASTM G – 53) 7-10 years Plasti Dip UV Stable Temperature use range -34°C to 93°C (-30°F to 200°F) Viscosity range 80–100 K U @ 25°C (77°F) +/-1°C Permeability (ASTM E – 96) 03 grains/sqft/hr Coverage 20 sqft (185 sqm) per litre at 5 mls (approx) Aerosol: 5–10 sqft (05–1 sqm) (approx) based on 400 ml can Dielectric (ASTM D – 149) 1,400 v/mil RECOMMENDED EQUIPMENT AND SETTINGS Gun: Binks model 95 Nozzle: 63B Needle: 663A Material: 20–25 psi Atomization: 15–25 psi Dilution: As needed Cap: 63PB (up to 50% dilution) or 66SD (up to 50% dilution) for heavier build up Clean up: Plasti Dip Gun wash Also recommended: Devilbiss Tip/nozzle: 14–15 mm HCF page 19 SPECIFICATIONS Solids (wt): 36% Abrasion: (ASTM D-4060) 00005 inches/100 cycles Tensile: (ASTM D-2370) 1584psi Weatherability: (ASTM G-53) Excellent 7-10 years Permeability: Limited Chemical resistance: Petroleum: Excellent Acid, alkaline: Good Alcohol, ketone, chlorinated solvent: Limited Ultimate elongation: (ASTM D-2370-82) 280% Dielectric: (ASTM D-149) 1,100 v/mil Temperature use range: -18°C–120°C (-0°F–250°F) Viscosity range: 4,000–10,000 cps Finish: Semi gloss Shelf life: 1 year at 25°C (77°F) Coverage: 25 sqft (23 m2) per litre (approx) GLOSSIFIER page 8 SPECIFICATIONS Solids (wt): 10% Shelf life: 1 + years at 25°C (77°F) unopened container Temperature use range -34°C to 93°C (-30°F to 200°F) Block resistance: 4hr @ 60°C (140°F) Finish: Gloss Coverage: 25 sqft (23 m2) per litre (approx ) Weatherability: (ASTM G-53) 7-10 years Chemical resistance Acids, alkalines, pollutants: Excellent Petroleums: Limited Surface preparation All surfaces to be coated must be free of any oils or dust
RkJQdWJsaXNoZXIy NTIxMTY=